Fix Your Stuff Community Store

HP Envy m6-k015dx Touchpad Replacement

What you need

  1. Careful: steps 1-6 are sourced from a guide that's marked as in-progress.

    • Shut down the computer

    • Remove all external devices

    • Unplug the AC adapter

    Edit

    • Close the computer

    • Turn it upside down

    • Remove the 12 screws from the bottom.

    Edit

    • Gently remove the service cover

    Edit

    • Disconnect the battery cable from the motherboard.

    Edit

    • Remove the 4 screws that hold the battery.

    Edit

    • Gently lift the battery out of the computer.

    Edit

  8. Careful: steps 7-9 are sourced from a guide that's marked as in-progress.

    • Remove the fan cable

    Edit

    • Remove the 2 screws around the fan

    Edit

    • Lift the fan up

    Edit

    • Unscrew the 3 screws that hold the card reader board to the system

    • Raise the card reader board from the system

    Edit

    • Remove the four screws that pin down the hard drive

    • Disconnect the harddrive from its connector

    • Remove the harddrive

    Edit

    • Only complete this step if your computer model has a solid state drive

    • Remove the two screws at the top of the solid state drive

    • Remove the solid state drive

    Edit

    • Remove the thirteen screws around the keyboard bracket

    • Gently remove the keyboard bracket from its top

    Edit

    • Remove the 4 screws on the touchpad's board

    • Gently lift the touchpad board from the side that the screws were on

    • Remove the touchpad board

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 60