Fix Your Stuff Community Store

HP Envy Touchsmart m6-k125dx Touch Screen Replacement

Introduction

Removing and replacing the touch screen is an easy fix for a broken, scratched, or smudged touch screen that might have dead pixels as well.

What you need

  1. HP Envy Touchsmart m6-k125dx Touch Screen Replacement, Touch Screen: step 1, image 1 of 1

    • Open the laptop.

    • Remove black tabs at bottom left and right corners and remove the two M2.5x2.5 screws behind the black tabs with the J0 screwdriver.

    Edit

  2. HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 2, image 1 of 2 HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 2, image 2 of 2

    • Insert pick between the black plastic screen panel and the silver plastic exterior case on the side of the device.

    • Slide pick around the border of the screen panel while keeping the pick between the mentioned panel and exterior case.

    • Repeat previous two steps until exterior case is removed. Pry with minimal force if necessary.

    Edit

  4. HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 3, image 1 of 3 HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 3, image 2 of 3 HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 3, image 3 of 3

    • Remove the front panel from the rest of the device and set it aside.

    • Remove the ten M2.5x2.5 screws with the J0 screwdriver.

    • Remove the eight M2.0x2.0 screws with the J0 screwdriver.

    Edit

  5. HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 4, image 1 of 3 HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 4, image 2 of 3 HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 4, image 3 of 3

    • Flip hinges down and away from the rest of the panel.

    • Remove the four M2.5x2.5 screws with the J0 screwdriver.

    • Move 4 pieces of black tape across the bottom of the panel and any other accessory tape.

    • Disconnect the display cable connector that is located at the bottom right of the panel by pulling lightly.

    Edit

  6. HP Envy Touchsmart m6-k125dx Touch Screen Replacement: step 5, image 1 of 1

    • Slowly lift the screen away from the touch screen front panel to remove.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 2 other contributors

Madison Velchek

Member since: 04/06/19

151 Reputation

1 Guide authored

Badges: 5

+2 more badges

Team

IUPUI, Team S14-G14, Wilson Spring 2019 Member of IUPUI, Team S14-G14, Wilson Spring 2019

IUPUI-WILSON-S19S14G14

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 855