Introduction

Removing the back panel is the necessary prerequisite for replacing many of the components of the HP Envy Touchsmart m6-k125dx. It is the part that covers the inside components and is held together by several screws underneath the laptop.

  1. Turn the laptop over so that the bottom is facing up
    • Turn the laptop over so that the bottom is facing up

    • Using the JIS screwdriver along with the J000 head, unscrew all 12 Phillips PM2.5x5.5 screws from the back panel.

  2. Carefully remove the back panel to reveal the inner components.
    • Carefully remove the back panel to reveal the inner components.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Shawn

Member since: 09/25/2017

237 Reputation

2 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 3

Past 7 Days: 7

Past 30 Days: 23

All Time: 273