Fix Your Stuff Community Store

HP Envy 17-J013CL Fan Module Replacement

Introduction

This step-by-step guide will help you on your journey disassembling the Fan Module.

What you need

  1. HP Envy 17-J013CL Fan Module Replacement, Taking the battery out: step 1, image 1 of 1

    • Hold the laptop and push the slider all the way till the battery pops out a little.

    Edit

  2. HP Envy 17-J013CL Fan Module Replacement: step 2, image 1 of 2 HP Envy 17-J013CL Fan Module Replacement: step 2, image 2 of 2

    • Unscrew the screw holding the backplate then pry open the backing.

    Edit

  3. HP Envy 17-J013CL Fan Module Replacement: step 3, image 1 of 3 HP Envy 17-J013CL Fan Module Replacement: step 3, image 2 of 3 HP Envy 17-J013CL Fan Module Replacement: step 3, image 3 of 3

    • Unscrew the screws holding the chassis in place.

    Edit

  5. HP Envy 17-J013CL Fan Module Replacement: step 4, image 1 of 1

    • Unscrew the Cd-Player and carefully slide the player out to the side.

    Edit

  6. HP Envy 17-J013CL Fan Module Replacement: step 5, image 1 of 1

    • Lift the back plate off the laptop, make sure to remove any wires connected to it.

    Edit

  7. HP Envy 17-J013CL Fan Module Replacement: step 6, image 1 of 1

    • Unscrew the fan and unplug the fan from the case.

    • Yellow - Unscrew. Red - Keep

    Edit

  8. HP Envy 17-J013CL Fan Module Replacement: step 7, image 1 of 1

    • Lift the fan and That’s It!

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order. (Don’t forget to plug in each wire)

One other person completed this guide.

Author

with 1 other contributor

Dean Heller

Member since: 06/16/22

145 Reputation

1 Guide authored

Badges: 2

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 5

All Time: 260