Introduction

The 15.6" screen shows you what the computer is actually doing. Computers still work without a screen, you just can't see what they are doing.

Image 1/1: If these screws are not removed and you separate the bottom portion of the screen, you will not be able to refasten the  screen to the back because the screw tab will break.
  • Remove the two screw covers located in the bottom corners of the screen and the 2.5 mm Phillips #0 screws underneath them.

  • If these screws are not removed and you separate the bottom portion of the screen, you will not be able to refasten the screen to the back because the screw tab will break.

Add Comment

Image 1/2: Image 2/2:
  • Only after removing the two bottom corner screws in Step 1, separate the screen from the back using an opening tool.

Add Comment

Image 1/1:
  • Remove the two 2.5 mm Phillips #0 screws with a Phillips#0 Screwdriver.

Add Comment

Image 1/1: The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.
  • Detach the webcam from the damaged screen using spudger.

  • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Add Comment

Image 1/1:
  • Gently detach small white connector with spudger.

Add Comment

Image 1/1:
  • Gently remove the tape with the wire to completely separate the screen.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Joshua Madden

Member since: 09/25/2016

194 Reputation

1 Guide authored

Team

USF Tampa, Team 9-4, Lacy Fall 2016 Member of USF Tampa, Team 9-4, Lacy Fall 2016

USFT-LACY-F16S9G4

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 41

All Time: 414