Skip to main content

Introduction

Remove the lower case to access the internal components of your HP Elitebook x360 1040 G5.

  1. Power off device before disassembly. Use the T5 Torx screwdriver to remove the six 4 mm screws from the underside of the laptop.
    • Power off device before disassembly.

    • Use the T5 Torx screwdriver to remove the six 4 mm screws from the underside of the laptop.

  2. Pry open the lower case from where it meets the laptop base. Remove the lower case from the work area.
    • Pry open the lower case from where it meets the laptop base.

    • Remove the lower case from the work area.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Corey Agena

Member since: 04/21/2019

671 Reputation

6 Guides authored

Team

Cal Poly, Team S1-G4, Maness Spring 2019 Member of Cal Poly, Team S1-G4, Maness Spring 2019

CPSU-MANESS-S19S1G4

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 34

All Time: 640