Fix Your Stuff Community Store

HP EliteBook 1040 G4 SSD Replacement

Introduction

Use this guide to replace the hard drive on the HP Elitebook 1040 G4. The solid-state drive (SSD) is a storage component of the computer which and saves programs. It is a long term storage device and may need to be replaced or removed. There are typically 3 common reasons you would need to remove a hard drive: (1) if the hard drive fails, (2) need more storage, or (3) need a speed boost. Before beginning, be sure to completely power off your computer.

To complete this guide, you will need a #T5 Torx head screwdriver and a Phillips #00 screwdriver.

What you need

  1. HP EliteBook 1040 G4 SSD Replacement, Back Cover: step 1, image 1 of 1

    • Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.

    Edit

  2. HP EliteBook 1040 G4 SSD Replacement: step 2, image 1 of 2 HP EliteBook 1040 G4 SSD Replacement: step 2, image 2 of 2

    • Lift the back cover up and off the device.

    Edit

  4. HP EliteBook 1040 G4 SSD Replacement, SSD: step 3, image 1 of 1

    • Using the Phillips #00 screwdriver, remove the single 5 mm screw securing the SSD to the motherboard.

    Edit

  5. HP EliteBook 1040 G4 SSD Replacement: step 4, image 1 of 1

    • Lift the SSD up and out of the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Alexandra Sturgis

Member since: 09/28/21

85 Reputation

1 Guide authored

Badges: 3

Team

Clemson, Team 4-1, Hunter Fall 2021 Member of Clemson, Team 4-1, Hunter Fall 2021

CLEM-HUNTER-F21S4G1

5 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 33

All Time: 721