Skip to main content

HP Elite x2 1012 G2 Battery Replacement

What you need

  1. HP Elite x2 1012 G2 Battery Replacement, Screen: step 1, image 1 of 1
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

  2. HP Elite x2 1012 G2 Battery Replacement: step 2, image 1 of 3 HP Elite x2 1012 G2 Battery Replacement: step 2, image 2 of 3 HP Elite x2 1012 G2 Battery Replacement: step 2, image 3 of 3
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

  3. HP Elite x2 1012 G2 Battery Replacement: step 3, image 1 of 2 HP Elite x2 1012 G2 Battery Replacement: step 3, image 2 of 2
    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

    • During reassembly, certain clips/edges may not snap into place properly even with a lot of force. To counteract this, lift the edge up, place the suction cup further inwards on the screen and pull it slightly upwards while pressing the edge of the screen downwards. The edge should snap correctly into the housing.

  4. HP Elite x2 1012 G2 Battery Replacement: step 4, image 1 of 1
    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

  5. HP Elite x2 1012 G2 Battery Replacement: step 5, image 1 of 3 HP Elite x2 1012 G2 Battery Replacement: step 5, image 2 of 3 HP Elite x2 1012 G2 Battery Replacement: step 5, image 3 of 3
    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

  6. HP Elite x2 1012 G2 Battery Replacement: step 6, image 1 of 2 HP Elite x2 1012 G2 Battery Replacement: step 6, image 2 of 2
    • Remove the screen by gently lifting it off of the device.

  7. HP Elite x2 1012 G2 Battery Replacement, Battery: step 7, image 1 of 1
    • Orient the device so that the battery is closest to you.

    • The battery is the large, black rectangle at the bottom of the device.

  8. HP Elite x2 1012 G2 Battery Replacement: step 8, image 1 of 2 HP Elite x2 1012 G2 Battery Replacement: step 8, image 2 of 2
    • Remove all six Phillips 3 mm screws around the battery by rotating in the counterclockwise direction with a Phillips screwdriver.

  9. HP Elite x2 1012 G2 Battery Replacement: step 9, image 1 of 2 HP Elite x2 1012 G2 Battery Replacement: step 9, image 2 of 2
    • Remove the battery's connector by pushing both sides of the tab towards yourself with a plastic opening tool.

  10. HP Elite x2 1012 G2 Battery Replacement: step 10, image 1 of 1
    • Lift the battery out of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

17 other people completed this guide.

Andy Velazquez

Member since: 04/18/18

365 Reputation

1 Guide authored

Team

Cal Poly, Team S18-G5, Livingston Spring 2018 Member of Cal Poly, Team S18-G5, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G5

4 Members

13 Guides authored

6 Guide Comments

how do you test the battery? what voltage should it be maintaining?

scott kay - Reply

Bien tout en image

tech25@hotmail.fr - Reply

Hi, after the replacement battery
toch not working, help pls?

Parsa Aghabeikzadeh - Reply

The first "Foil-Connector" in step 5 is for the Touch Feature. Make sure it fits propper!

Anselmbe -

PC not coming on, also not charging.

Abiola - Reply

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 99

Past 30 Days: 331

All Time: 28,442