Skip to main content

Introduction

Use this guide to replace the screen on your HP Beats 15-p390nr.

Parts

No parts specified.

  1. Use metal spudger to pry the screen from the back panel.
    • Use metal spudger to pry the screen from the back panel.

    • Popping sounds are normal

    • Make sure device is turned off

  2. Use the Phillips #0 screwdriver to remove the four screws around the screen.
    • Use the Phillips #0 screwdriver to remove the four screws around the screen.

  3. Unclip wire from the screen and lift screen to remove. Unclip wire from the screen and lift screen to remove.
    • Unclip wire from the screen and lift screen to remove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 35

All Time: 1,405