Parts

No parts required.

Insert the plastic opening tool between the digitizer and the case.
  • Insert the plastic opening tool between the digitizer and the case.

  • Place the spudger in the gap created by the plastic opening tool to assist in separation.

Add Comment

Slide the spudger along the perimeter of the device to fully separate the two pieces. Slide the spudger along the perimeter of the device to fully separate the two pieces.
  • Slide the spudger along the perimeter of the device to fully separate the two pieces.

Add Comment

Use the tip of the spudger to release the latches on the motherboard. Use the tip of the spudger to release the latches on the motherboard.
  • Use the tip of the spudger to release the latches on the motherboard.

Add Comment

Remove the camera from the device. Remove the camera from the device.
  • Remove the camera from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Gornati

Member since: 01/22/2015

401 Reputation

4 Guides authored

Team

USF Tampa, Team 7-6, Remmell Winter 2015 Member of USF Tampa, Team 7-6, Remmell Winter 2015

USFT-REMMELL-W15S7G6

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 35