Image 1/1: Place the spudger in the gap created by the plastic opening tool to assist in separation.
  • Insert the plastic opening tool between the digitizer and the case.

  • Place the spudger in the gap created by the plastic opening tool to assist in separation.

Add Comment

Image 1/2: Image 2/2:
  • Slide the spudger along the perimeter of the device to fully separate the two pieces.

Add Comment

Image 1/1: Apply leverage to break the glue that is attaching the battery to the case.
  • Insert the plastic opening tool between the battery and case.

  • Apply leverage to break the glue that is attaching the battery to the case.

Add Comment

Image 1/1: Breaking all the glue between the battery and case may take a long time.
  • Continue breaking the glue along the perimeter of the battery until the battery can be removed.

  • Breaking all the glue between the battery and case may take a long time.

Add Comment

Image 1/2: The heat from the soldering iron may cause personal injury or damage the internal components of the tablet. Image 2/2: The heat from the soldering iron may cause personal injury or damage the internal components of the tablet.
  • Using the soldering iron, heat up the solder that is attaching the battery to the motheboard.

  • The heat from the soldering iron may cause personal injury or damage the internal components of the tablet.

Add Comment

Image 1/1: Remove the battery from the motherboard.
  • Suck up the leftover solder using the desoldering pump.

  • Remove the battery from the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Gornati

Member since: 01/22/2015

401 Reputation

4 Guides authored

Team

USF Tampa, Team 7-6, Remmell Winter 2015 Member of USF Tampa, Team 7-6, Remmell Winter 2015

USFT-REMMELL-W15S7G6

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 10

All Time: 392