1. Remove back of tablet using the plastic opening tool
    • Remove back of tablet using the plastic opening tool

      • Slide the opening tool between the back of the tablet and the digitizer

      • Lift along the edges until the back of the tablet and the digitizer are separated

  2. Remove 4 screws located on the red motherboard
    • Remove 4 screws located on the red motherboard

      • The red motherboard will be loose, but does not need to come completely unattached

    • Remove 7 screws located around the edges of the tablet

      • 5 screws are visible around the edges of the device and 2 screws are located underneath the red motherboard

    • Lift digitizer from the screen

      • After removing all of the screws, the screen should easily separate from the digitizer

    • Now you can replace the old digitizer with a new one

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sara Hill

Member since: 09/30/2015

101 Reputation

2 Guides authored

Team

Ohio State, Team 2-3, Garvin Fall 2015 Member of Ohio State, Team 2-3, Garvin Fall 2015

OSU-GARVIN-F15S2G3

4 Members

4 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 7

All Time: 168