HEC Remote Control Repair Guide
Johnson and 7 other contributors
Last updated on Jan 14, 2026
Views: 1.6K
View statistics:
- Past 24 Hours:
- 8
- Past 7 Days:
- 27
- Past 30 Days:
- 113
- All Time:
- 1,611
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Confusing Text
Some of this guide's text is confusing, duplicated, or off-topic. Clarify it by editing!
Missing Steps
Oops! This guide is currently missing one or more important steps.
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
Introduction
Go to step 1 ↓If your HEC Remote Control stops working properly due to issues like, sticky buttons, a bad LED, or no response from the remote, the use this guide to repair your HEC Remote Control.
The remote control works by sending infrared (IR) signals to communicate with your device. Some symptoms of a faulty IR signal could be buttons not working or corrosion of battery terminals.
Before disassembly, please check for dirt buildup in and on the remote, dead batteries, and battery corrosion. Many signal issues can be resolved by performing a simple cleanup process on the remote.
Finally, remove batteries and disconnect any power source to the remote to prevent further damage.
What you need
Tools
-
Spudger4.9
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team 6-1, Regan Fall 2011 Member of Cal Poly, Team 6-1, Regan Fall 2011
CPSU-REGAN-F11S6G1
4 Members
72 Guides authored
