Skip to main content

Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement

What you need

  1. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement, Charging Cable with Gun: step 1, image 1 of 2 Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement, Charging Cable with Gun: step 1, image 2 of 2
    • Ensure the circuit breaker supplying power to the electrical socket is switched off.

    • Unplug the charging station from the electrical socket.

  2. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 2, image 1 of 2 Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 2, image 2 of 2
    • Remove the safety pin from the mounting bracket located on the rear of the charging station.

  3. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 3, image 1 of 2 Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 3, image 2 of 2
    • Lift and pull the charging station off the mounting bracket.

  4. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 4, image 1 of 2 Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 4, image 2 of 2
    • Remove the four screws located in each corner of the front of the charging station using a 4 mm Allen key.

  5. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 5, image 1 of 2 Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 5, image 2 of 2
    • Remove the front plate to reveal the interior of the unit.

  6. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 6, image 1 of 3 Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 6, image 2 of 3 Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 6, image 3 of 3
    • On the bottom-right side of the unit, you will see four wires, each screwed into electrical terminals on the unit's motherboard.

    • Unscrew each of the four screws from the electrical terminals using a Phillips screwdriver to remove each of the four wires.

  7. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 7, image 1 of 1
    • Unscrew the cable connector on the bottom-right side of the charging station.

    • Twist the cable connector counterclockwise to remove it.

  8. Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: step 8, image 1 of 1
    • Firmly pull out the cable towards you through the bottom of the charging station.

    • Once the cable is removed, replace the old charging cable and gun with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Rameez Khan

Member since: 01/16/23

157 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 28

All Time: 337