Introduction

This guide shows how to locate the screws on the handle cover and remove them to allow the handle cover to come off. This is only necessary if there is a problem in collapsing the stroller.

Parts

No parts required.

Image 1/1: Locate the four 22 mm Phillips screws on the underside of the handle.
  • Flip the stroller over so that the screws on the handle are facing upwards.

  • Locate the four 22 mm Phillips screws on the underside of the handle.

Add Comment

Image 1/1:
  • Using a Phillips #1 screwdriver, remove the four 22 mm screws and set them aside.

Add Comment

Image 1/1:
  • Push the switch in to allow the handle cover to come free.

Add Comment

Image 1/1: Avoid pushing the two rods fully into the slots on the handle, as they can be very difficult to remove.
  • Remove the handle cover from the handle.

  • Avoid pushing the two rods fully into the slots on the handle, as they can be very difficult to remove.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tyler Laird

Member since: 09/29/2015

471 Reputation

3 Guides authored

Team

Cal Poly, Team 11-4, Forte Fall 2015 Member of Cal Poly, Team 11-4, Forte Fall 2015

CPSU-FORTE-F15S11G4

5 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 16

All Time: 400