Introduction

The replacement is a very simple fix to any problem you may have with your remote. All you need are your hands and plastic spudger to dissemble this remote.

Parts

No parts required.

Slide back the battery cover. Remove the (2) AA batteries by prying upwards with a plastic spudger from the (+) terminals.
  • Slide back the battery cover.

  • Remove the (2) AA batteries by prying upwards with a plastic spudger from the (+) terminals.

Add Comment

Locate the (6) clips that hold together the remote. Gently separate the cover with a plastic spudger. Fully disengage the clips before beginning to gently pry open the remote. This might result in breaking the thin plastic shell and making the clips non-functional.
  • Locate the (6) clips that hold together the remote.

  • Gently separate the cover with a plastic spudger.

  • Fully disengage the clips before beginning to gently pry open the remote. This might result in breaking the thin plastic shell and making the clips non-functional.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zachary Nelson

Member since: 02/08/2016

344 Reputation

3 Guides authored

Team

USF Tampa, Team 6-3, Eyestone Spring 2016 Member of USF Tampa, Team 6-3, Eyestone Spring 2016

USFT-EYESTONE-S16S6G3

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 125