Skip to main content

This teardown is not a repair guide. To repair your Google Pixel Watch 4, use our service manual.

  1. Google Pixel Watch 4 Chip ID, Main Board - Front Side: step 1, image 1 of 2 Google Pixel Watch 4 Chip ID, Main Board - Front Side: step 1, image 2 of 2
    • Qualcomm SW5100 Snapdragon W5+ Gen 2 quad-core applications processor layered under a Biwin BWCL1EZC-32G-X 2 GB LPDDR4X & 32 GB NAND flash

    • Ambiq AP510NFA-CCR ARM Cortex-M55 microcontroller

    • Cirrus Logic CS40L26 haptic driver

    • Qorvo ACT28020 battery charger

    • Qualcomm envelope tracker

    • Richtek AMOLED display power supply

  2. Google Pixel Watch 4 Chip ID, Main Board - Front Side - Connectivity: step 2, image 1 of 1
    • Likely USI WP1-2023-GS1 Bluetooth & WiFi module

    • Qualcomm WTR3925 RF transceiver

    • Qualcomm QFM6518 front-end module

    • Qualcomm QPA6590 RF power amplifier

    • Skyworks SKY65725-11 GPS/GNSS/BDS LNA front-end module

    • Skyworks SKY65728-11 GPS LNA front-end module

  3. Google Pixel Watch 4 Chip ID, Main Board - Front Side - Sensors: step 3, image 1 of 1
    • TDK Invensense ICM-45686 6-axis MEMS accelerometer & gyroscope

  4. Google Pixel Watch 4 Chip ID, Main Board - Back Side - Connectivity: step 4, image 1 of 2 Google Pixel Watch 4 Chip ID, Main Board - Back Side - Connectivity: step 4, image 2 of 2
    • Likely USI WP1-2023-GN1 NFC module

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 16

Past 7 Days: 65

Past 30 Days: 267

All Time: 454