Fix Your Stuff Community Store

General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement

Introduction

Use this guide to remove or replace the front assembly on the General Wire Drain Cleaner RSVD 2014.

What you need

  1. General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the cable end cover: step 1, image 1 of 2 General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the cable end cover: step 1, image 2 of 2

    • Turn off the drain cleaner and disconnect it from power before beginning any maintenance.

    • Slide the rubber cable cover off of the end of the cable.

    Edit

  3. General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Loosen the front assembly screws: step 2, image 1 of 1

    • Use a flathead screwdriver to loosen the three screws around the edge of the front assembly.

    Edit

  4. General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the front assembly: step 3, image 1 of 3 General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the front assembly: step 3, image 2 of 3 General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the front assembly: step 3, image 3 of 3

    • Pull the front assembly off of the drain cleaner and slide it over the cable to remove it.

    • During reassembly, make sure the three screws on the front assembly line up with the slots on both the metal cable container back and the plastic cable container.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

Adam O'Camb

Member since: 04/11/15

197,478 Reputation

416 Guides authored

Badges: 39

+36 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 25

All Time: 1,068