Introduction
Use this guide to replace the power cable in a General Pipe Cleaners Drain Cleaner PMEBO 2016.
What you need
-
-
Use a Phillips #2 driver to remove the two screws securing the control box cover.
-
-
-
-
Push in on the small tab on the side of the plastic power cable clip.
-
While holding the tab down, pull straight down on the power cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.