General Electric Telephone 2-9710A Phone Cord Replacement - iFixit Repair Guide

Introduction

Use this guide to replace the cord that connects the handset and the base.

What you need

Step 1 Phone Cord

General Electric Telephone 2-9710A Phone Cord Replacement, Phone Cord: step 1, image 1 of 2

General Electric Telephone 2-9710A Phone Cord Replacement, Phone Cord: step 1, image 2 of 2

Unplug the device before proceeding.
Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.
To release the cable, gently press down on the top plastic tab of the connector.

Step 2

General Electric Telephone 2-9710A Phone Cord Replacement: step 2, image 1 of 3

General Electric Telephone 2-9710A Phone Cord Replacement: step 2, image 2 of 3

General Electric Telephone 2-9710A Phone Cord Replacement: step 2, image 3 of 3

Remove the 7.5 mm screw.
Remove the screw cap.
Pull up the phone cord to remove it from the base.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 15 other contributors

Norberto Sanchez

Member since: 09/26/12

70 Reputation

5 Guides authored

Team

Cal Poly, Team 16-59, Forte Fall 2012 Member of Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Members

17 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,092