Unplug the toaster.
  • Unplug the toaster.

Add Comment

Remove the two levers and four dials by pulling them out directly towards you. Removing these components may require some force, but they will release.
  • Remove the two levers and four dials by pulling them out directly towards you.

  • Removing these components may require some force, but they will release.

Add Comment

Carefully remove the top part of the toaster casing.
  • Carefully remove the top part of the toaster casing.

  • Disconnect the small plastic clips on the back of the toaster.

Add Comment

Turn the toaster over so the bottom is on top or 180 degrees.
  • Turn the toaster over so the bottom is on top or 180 degrees.

Add Comment

Locate the screws that are holding the bottom plate onto the toaster. There is four (4) screws you need to locate and are near the corners.
  • Locate the screws that are holding the bottom plate onto the toaster. There is four (4) screws you need to locate and are near the corners.

Add Comment

With a screwdriver, remove all four of the screws so that there i nothing holding the bottom plate onto the toaster.
  • With a screwdriver, remove all four of the screws so that there i nothing holding the bottom plate onto the toaster.

Add Comment

  • You will notice that the bottom is also attached to the cord. You will need to disconnect it from the cord in order to remove it fully.

Add Comment

Now that the bottom plate is fully off you can put the new one on. Start by running it around the cord and make sure it is lined up correct. You don't want to take it off because its on backwards.
  • Now that the bottom plate is fully off you can put the new one on. Start by running it around the cord and make sure it is lined up correct. You don't want to take it off because its on backwards.

Add Comment

Now that you have the bottom plate in place, it is time to put the four screws that hold it on back in. Once these screws are in you have finished replacing the bottom plate!
  • Now that you have the bottom plate in place, it is time to put the four screws that hold it on back in. Once these screws are in you have finished replacing the bottom plate!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jacqueline Tran

Member since: 10/29/2013

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 344