Introduction

The rear wheels translate motor's rotation to the movement of the car. If the wheels get damaged or misshapen, they may not allow the motors to move the car and will need to be replaced. The following steps will show how to replace the rear wheels.

Parts

No parts required.

Unscrew and remove the 5mm Phillips #0 screw located at the center of the wheel while holding the wheel still. Slide the wheel off of the axle.
  • Unscrew and remove the 5mm Phillips #0 screw located at the center of the wheel while holding the wheel still.

  • Slide the wheel off of the axle.

  • Repeat the previous steps for the other rear wheel.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jake Stone

Member since: 02/01/2015

505 Reputation

4 Guides authored

Team

Cal Poly, Team 8-38, Amido Winter 2015 Member of Cal Poly, Team 8-38, Amido Winter 2015

CPSU-AMIDO-W15S8G38

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 3

All Time: 110