Gateway 600YG2 LCD Replacement
Elizabeth Mazer and 7 other contributors
Last updated on Jan 14, 2026
Views: 2.6K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 23
- Past 30 Days:
- 89
- All Time:
- 2,570
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Introduction
Go to step 1 ↓Replace a faulty display on your Gateway 600YG2 using this guide. If the glass on your display cracks or breaks, it may need to be replaced. Before using this guide, inspect the display for any swelling and check software compatibility. This could harm the computer's liquid crystal display (LCD) capabilities. The LCD is an energy-efficient liquid organic material with long-lasting LED backlighting, no screen burn (deteriorated pixels from overuse), and adaptable file sizes.
To disassemble electronic components in step 1 of this guide, you will need a Phillips #0 Screwdriver (identified as piece number IF145-005). Sprunger (identified as piece number IF145-002) will also be required to pry open the pieces.
Turn off your laptop and disconnect it from any power sources before beginning the process.
What you need
Tools
-
Spudger4.9
-
-
-
Flip the laptop over.
-
Slide the battery release tab to the right to open the battery cover.
Ask FixBot
-
-
-
Remove the battery cover using the tab on the right side.
-
Lift and remove the battery.
-
-
-
-
-
Insert the spudger between the "sysrq" and "ins" keys.
-
Gently pry free the power button panel above the keyboard, from the right and moving to the left.
-
-
-
-
-
Remove the five screws with a Phillips #0 screwdriver.
-
Lift the hinge covers along the outer edges with the spudger until they are released.
-
-
-
-
Using the Phillips #0 screwdriver, remove six screws that hold the LCD to the hinge.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 20-10, Maness Fall 2010 Member of Cal Poly, Team 20-10, Maness Fall 2010
CPSU-MANESS-F10S20G10
3 Members
132 Guides authored
