Garmin StreetPilot c330 Speakers Replacement

Step 1 Outer Casing




• At the top of the outer frame, insert the plastic spudger into the groove in the center.
• Lever the frame gently until it pops out of the case.
Step 2




• Use a Phillips #00 screwdriver to remove the four screws around the screen.
Step 3
• Gently pull from both ends of the casing to separate the front and back panels.
• Do not force the pieces apart wider than the length of the connecting wires, or you will damage the wiring.
Step 4
• Gently unplug the white cable connector using either your fingers or tweezers.
Step 5
• Carefully expose both halves of the device.
• Be sure not to pull the two halves apart further than the black wire can reach.
Step 6 Battery
• Use a Phillips #00 screwdriver to remove the two screws from the battery bracket.
Step 7
• Carefully peel the metal bracket away from the battery.
• Pull the battery away from the back cover.
• Desolder the wires from the speakers using a soldering iron.
Step 8 Speakers
• Carefully use spudger to pry speakers from outer casing.
• Once removed, you may use a soldering iron to remove wires from speakers.

Author

with 7 other contributors

Michael

Member since: 10/07/10

107 Reputation

1 Guide authored

Badges: 6

• 
• 
• 

+3 more badges

Team

Cal Poly, Team 22-1, Maness Fall 2010 Member of Cal Poly, Team 22-1, Maness Fall 2010

CPSU-MANESS-F10S22G1

3 Members

4 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview