Garmin StreetPilot C330 Outer Casing Replacement

Step 1 Outer Casing




• Use a plastic spudger tool to remove the plastic frame.
• Insert the tool into the groove in the center of the top of the outer frame and lever it gently until it pops out.
Step 2




• Use a phillips head screw driver to remove all four screws in the corners around the screen.
• Set the screws aside for later.
Step 3
• Gently pull from both ends to separate the front panel from the back.
• Do not force the pieces apart wider than the length of the connecting wires or you will damage the wiring.
Step 4
• Locate the white wire clip. Gently unplug it using either your fingers or tweezers.
Step 5
• Carefully expose both halves of the device.
• Be sure to not pull the two halves apart too hard to avoid damaging the black wire.

Author

with 16 other contributors

Adrian Leon

Member since: 10/07/10

173 Reputation

3 Guides authored

Badges: 9

• 
• 
• 

+6 more badges

Team

Cal Poly, Team 22-1, Maness Fall 2010 Member of Cal Poly, Team 22-1, Maness Fall 2010

CPSU-MANESS-F10S22G1

3 Members

4 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview