Introduction

This teardown is a prerequisite to all of the replacement guides for the Garmin Nuvi 42LM. This is because the battery needs to always be removed before working further on the device.

Remove the four screws on the back of the GPS using the T5 Torx screwdriver. Remove the four screws on the back of the GPS using the T5 Torx screwdriver. Remove the four screws on the back of the GPS using the T5 Torx screwdriver.
  • Remove the four screws on the back of the GPS using the T5 Torx screwdriver.

Add Comment

Pry the GPS open using a plastic opening tool. When prying open the device, use caution to avoid damaging the motherboard. When prying open the device, use caution to avoid damaging the motherboard.
  • Pry the GPS open using a plastic opening tool.

  • When prying open the device, use caution to avoid damaging the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 3

All Time: 49