Introduction

You will be removing the existing straps on the watch in order to replace a damaged strap or simply to put a new style of strap on. The tools you will need for this fix is a Torx T9 screwdriver.

Parts

No parts required.

Image 1/1:
  • Grab your Garmin watch and flip it over to get a good view of the four screws that connect the straps to the housing.

No way is this a two minute, easy to do exercise. The screws connect to the bar. The bar rotates. Once the first screw is out, the second is very difficult to extract because there is no leverage to use when attempting to turn the remaining screw. Even the simplest internet post recommends a vise.

chiphoyt - Reply

Image 1/1:
  • Use a Torx T9 screwdriver to remove the four .8mm screws. Once the screws are removed the watch straps should fall out of the housing.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brandon Barger

Member since: 02/13/2016

821 Reputation

5 Guides authored

Team

IUPUI, Team 54-4, Wilson Spring 2016 Member of IUPUI, Team 54-4, Wilson Spring 2016

IUPUI-WILSON-S16S54G4

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 21

Past 30 Days: 90

All Time: 1,587