Image 1/2: Image 2/2:
  • Be sure to turn off the Dash Cam by pressing the power button.

Add Comment

Image 1/2: Remove the 9 mm screw using the Torx T6 screwdriver. Image 2/2: Remove the 9 mm screw using the Torx T6 screwdriver.
  • Rotate the Dash Cam to where the socket faces you.

  • Remove the 9 mm screw using the Torx T6 screwdriver.

Add Comment

Image 1/2: Image 2/2:
  • Remove the Dash Cam socket piece.

Add Comment

Image 1/2: Remove the two 5 mm screws using the Torx T5 screwdriver. Image 2/2: Remove the two 5 mm screws using the Torx T5 screwdriver.
  • Rotate the Dash Cam to where the product information faces you.

  • Remove the two 5 mm screws using the Torx T5 screwdriver.

Add Comment

Image 1/3: The compact nature of the casing requires use of the metal spudger for needed leverage. Image 2/3: The compact nature of the casing requires use of the metal spudger for needed leverage. Image 3/3: The compact nature of the casing requires use of the metal spudger for needed leverage.
  • Remove top case from the bottom case.

  • The compact nature of the casing requires use of the metal spudger for needed leverage.

Add Comment

Image 1/3: By removing the screws, the metal battery frame will now become free from the rest of the device. Image 2/3: By removing the screws, the metal battery frame will now become free from the rest of the device. Image 3/3: By removing the screws, the metal battery frame will now become free from the rest of the device.
  • Remove the two 5mm screws using the Torx T5 screwdriver

  • By removing the screws, the metal battery frame will now become free from the rest of the device.

Add Comment

Image 1/2: Use the nylon spudger to pry the corner of the case off of the motherboard. Image 2/2: Use the nylon spudger to pry the corner of the case off of the motherboard.
  • This step shows the use of an incorrect tool. Always use an ESD safe tool, like a nylon spudger, when working with delicate internal components.

  • Use the nylon spudger to pry the corner of the case off of the motherboard.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the metal case off of the motherboard.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the battery connection.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the three 5 mm screws using the Torx T5 screwdriver.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use tweezers to remove the connector on the top right of the motherboard.

Add Comment

Image 1/3: Use tweezers to remove the connector next to the SD card slot. Image 2/3: Use tweezers to remove the connector next to the SD card slot. Image 3/3: Use tweezers to remove the connector next to the SD card slot.
  • Remove the motherboard from the case and flip to reveal SD connection.

  • Use tweezers to remove the connector next to the SD card slot.

Add Comment

Image 1/1: Disconnect from the front case and the copper strip.
  • The motherboard is now removed aside from the copper strip and its connector.

  • Disconnect from the front case and the copper strip.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jesse Hillman

Member since: 10/04/2016

667 Reputation

5 Guides authored

Team

USF Tampa, Team 2-1, Cagle Fall 2016 Member of USF Tampa, Team 2-1, Cagle Fall 2016

USFT-CAGLE-F16S2G1

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 71