Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

GameSir Cyclone 2 Top Cover Replacement

Introduction

Follow this guide if you need to remove the faceplate of your GameSir Cyclone 2. You may need to replace the faceplate or access the internals of your controller.

What you need

  1. GameSir Cyclone 2 Top Cover Replacement, Top Cover: step 1, image 1 of 3 GameSir Cyclone 2 Top Cover Replacement, Top Cover: step 1, image 2 of 3 GameSir Cyclone 2 Top Cover Replacement, Top Cover: step 1, image 3 of 3

    • Use a T6 Torx to remove seven screws from the bottom of the controller.

    • The last screw is under the sticker. Lift the sticker with tweezers, then then remove the final screw.

    Edit

  2. GameSir Cyclone 2 Top Cover Replacement: step 2, image 1 of 1

    • The two larger screws belong on the top two sockets of the controller

    Edit

  4. GameSir Cyclone 2 Top Cover Replacement: step 3, image 1 of 1

    • The remaining five sockets in these locations

    Edit

  5. GameSir Cyclone 2 Top Cover Replacement: step 4, image 1 of 2 GameSir Cyclone 2 Top Cover Replacement: step 4, image 2 of 2

    • The front plate should pop with minimal force with the D-Pad and action buttons becoming loose as well.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 2 other contributors

Ross Debortoli

Member since: 10/17/25

325 Reputation

3 Guides authored

Badges: 8

+5 more badges

Team

UMass Dartmouth, Team 2-6, Bowman Fall 2025 Member of UMass Dartmouth, Team 2-6, Bowman Fall 2025

UMASSD-BOWMAN-F25S2G6

4 Members

7 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 11

Past 30 Days: 50

All Time: 76