GATEWAY NE56R09u RAM Replacement
joshua depina and 4 other contributors
Last updated on Jun 1, 2020
Views: 665
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 20
- Past 30 Days:
- 60
- All Time:
- 665
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓The purpose of the RAM are for quick and temporary memory slots, this model specifically has two RAM that are blue in color. Before attempting to do a replacement, make sure your device is powered off and make sure to read through the guide first before jumping straight into a repair. Safety is always first!
What you need
Tools
-
Spudger4.9
-
-
-
Using a nylon spudger or your fingers, push down on the orange battery clip to release the battery.
-
-
-
-
-
Locate the casing that protects the RAM modules, wireless card, and hard drive.
-
-
-
With the PH1 head from the tool kit and the adjustable screwdriver, remove the 2 M3x5.0mm screws on the casing to get to the RAM modules.
-
-
-
On each RAM module there are two silver latches holding them in place
-
Release the latches to be able to remove the RAM module.
-
-
Ask FixBot
To reassemble your device, please follow these instructions in reverse order.
Team
UMass Dartmouth, Team S6-G1, Peak Spring 2019 Member of UMass Dartmouth, Team S6-G1, Peak Spring 2019
UMASSD-PEAK-S19S6G1
2 Members
48 Guides authored
