Introduction

The hinge cover has the computer power button, wireless switch, and volume toggle.

Locate the two clips on the bottom of the computer that support the battery.
  • Locate the two clips on the bottom of the computer that support the battery.

Add Comment

Using your fingers,  push the clips inward and then upward.
  • Using your fingers, push the clips inward and then upward.

  • Lift the battery out of the computer.

Add Comment

  • Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.

Add Comment

  • Lay the computer flat on a stable surface with the monitor pointing away from you.

Add Comment

  • Use a spudger to partially lift the hinge cover.

Add Comment

  • The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.

  • Lift the hinge cover enough to expose the ribbon cable.

Add Comment

  • Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Neil Daniels

Member since: 01/17/2011

1,276 Reputation

11 Guides authored

Team

Cal Poly, Team 5-18, Amido Winter 2011 Member of Cal Poly, Team 5-18, Amido Winter 2011

CPSU-AMIDO-W11S5G18

3 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 17

All Time: 2,980