Introduction

This guide will show you how to replace the lens assembly on the Fujifilm X-M1.

We highly suggest you use a magnetic project mat or an organization tray. This camera has many different types of screws and keeping them organized is key to proper reassembly.

Image 1/2: Slide the button up to open the compartment. Image 2/2: Slide the orange button up to release the battery.
  • Turn the camera upside down to locate the battery compartment.

  • Slide the button up to open the compartment.

  • Slide the orange button up to release the battery.

  • The battery is not shown in these photos.

Add Comment

Image 1/3: Remove the six 6.5 mm Phillips screws from the front of the lens assembly. Image 2/3: Use tweezers to remove the top metal ring and the thin metal ring below it . Image 3/3: Use tweezers to remove the top metal ring and the thin metal ring below it .
  • Twist the lens cap to remove it from the camera.

  • Remove the six 6.5 mm Phillips screws from the front of the lens assembly.

  • Use tweezers to remove the top metal ring and the thin metal ring below it .

Add Comment

Image 1/1:
  • Remove the four 4.3 mm Phillips screws inside the lens assembly.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kelsea Weber

Member since: 11/12/2015

9,232 Reputation

28 Guides authored

Team

iFixit Member of iFixit

Community

126 Members

5,821 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 13

All Time: 376