Introduction

When a camera's batteries loose their charge, they either need to be replaced or recharged. Also, whenever you want to service the camera, it's a good practice to remove the batteries before going any further with your repairs.

Image 1/1: Rotate the camera so that the label on the base of the camera is facing up.
  • Make sure that the camera is powered off before continuing.

  • Rotate the camera so that the label on the base of the camera is facing up.

  • On the battery compartment door, there is a slider that says "open". Slide it down and push the door to the right to release the door.

Add Comment

Image 1/3: When replacing the batteries, be sure to note the markings on the face of the battery compartment. These markings let you know which side of the battery ("+" or "-") needs to be facing up in each slot. Image 2/3: When replacing the batteries, be sure to note the markings on the face of the battery compartment. These markings let you know which side of the battery ("+" or "-") needs to be facing up in each slot. Image 3/3: When replacing the batteries, be sure to note the markings on the face of the battery compartment. These markings let you know which side of the battery ("+" or "-") needs to be facing up in each slot.
  • Remove all four batteries and set them aside.

  • When replacing the batteries, be sure to note the markings on the face of the battery compartment. These markings let you know which side of the battery ("+" or "-") needs to be facing up in each slot.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Stephen Calabrese

Member since: 02/17/2017

386 Reputation

3 Guides authored

Team

USF Tampa, Team S19-G4, Hoffman Spring 2017 Member of USF Tampa, Team S19-G4, Hoffman Spring 2017

USFT-HOFFMAN-S17S19G4

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 6

All Time: 68