Introduction

If your camera will not start, replacing the batteries might be a good solution.

Assure that your camera is off.
  • Assure that your camera is off.

  • Begin with the camera upside down so that the battery compartment is showing.

Add Comment

Deck the Halls
With tools and Fix Kits
Slide the latch down towards the lens. Push the battery cover out to the right, toward the HDMI and USB ports.
  • Slide the latch down towards the lens.

  • Push the battery cover out to the right, toward the HDMI and USB ports.

Add Comment

Lift the battery cover up so that you can view all four batteries. Remove the batteries from the compartment.
  • Lift the battery cover up so that you can view all four batteries.

  • Remove the batteries from the compartment.

My batteries burst. So I cleaned out inside with q tip. But one of the springs came out.battery port. How to fix?

Gregory Wilson - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Jackie Acevedo

Member since: 09/14/2015

271 Reputation

2 Guides authored

Team

CSU Fullerton, Team 1-4, Bruce Fall 2015 Member of CSU Fullerton, Team 1-4, Bruce Fall 2015

CSUF-BRUCE-F15S1G4

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 39

All Time: 531