Skip to main content

Fugoo Tough Device Speaker cover/Shell Replacement

What you need

  1. Fugoo Tough Device Speaker cover/Shell Replacement, Device Speaker/Shell: step 1, image 1 of 2 Fugoo Tough Device Speaker cover/Shell Replacement, Device Speaker/Shell: step 1, image 2 of 2
    • Begin by unscrewing the four 10.72mm corner screws using the Hex 2.0 screwdriver.

  2. Fugoo Tough Device Speaker cover/Shell Replacement: step 2, image 1 of 1
    • Using the Hex 1.5 screwdriver remove remaining 6-5.79mm screws on the front of the speaker.

  3. Fugoo Tough Device Speaker cover/Shell Replacement: step 3, image 1 of 1
    • Pull front part of shell away from back part of shell.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 222