Skip to main content

Free Shipping on Domestic Orders $75+

Front Panel

Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

What you need

    1. Front Panel, Remove the screws securing the front panel: step 1, image 1 of 1
      • Before beginning repairs, disconnect the device from power, disconnect all hoses, drain and depressurize the system, and let the device cool if the heater was recently used.

      • Use a Phillips screwdriver to remove the six screws securing the front panel.

      Ask FixBot

      Add Comment

    2. Front Panel, Tilt the front panel down: step 2, image 1 of 2 Front Panel, Tilt the front panel down: step 2, image 2 of 2
      • Grip the front panel at the top and tilt down to reveal the switch electronics.

      • The front panel will stay attached to the device with the flexible tubing.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Carsten Frauenheim

Member since: 03/10/20

171,409 Reputation

442 Guides authored

Team

iFixit Member of iFixit

Staff

122 Members

72,401 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 17

All Time: 119