Framework Laptop 13 Pro Mainboard Reset - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

1. Step 1 Plug the laptop in
  Plug the laptop into a power source.
  
  The red status LED near the right Expansion Card slots should blink continuously. If this LED isn't blinking, the laptop isn't receiving power correctly—try another USB-C port.
  
  Don't proceed unless the LED is blinking.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 2 Locate the Chassis open switch
  Locate the chassis open switch above the CPU.
  
  This switch is a sensor that detects if the Input Cover has been removed. It's a small silver block with a black toggle tab.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3 Press the switch
  Use your finger or the flat end of a Framework Screwdriver to do the following actions 10 times:
  
  Press and hold the switch down for two seconds.
  
  Release the switch and wait for the indicator LED to resume blinking.
  
  Repeat the process until you've done it 10 times.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 1 other contributor

Alex Diaz-Kokaisl

Member since: 01/16/22

250,065 Reputation

1,203 Guides authored

+35 more badges

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 15