Introduction

The bag cutter arm is plastic and therefore must be treated as such. It can break if attempted to move with too much force.

Open the device cover as shown in the image.
  • Open the device cover as shown in the image.

Add Comment

Deck the Halls
With tools and Fix Kits
Pull on the left side of the handle to release the bar from the holder. Not much force is required for the cutter arm to come loose. If it seems stuck squeeze the main arm sides together, as shown in the second photo
  • Pull on the left side of the handle to release the bar from the holder.

  • Not much force is required for the cutter arm to come loose. If it seems stuck squeeze the main arm sides together, as shown in the second photo

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mackenzie Grossgold

Member since: 04/14/2016

775 Reputation

6 Guides authored

Team

Cal Poly, Team 34-17, Maness Spring 2016 Member of Cal Poly, Team 34-17, Maness Spring 2016

CPSU-MANESS-S16S34G17

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 68