Introduction
Having trouble getting your Flydigi Vader 3 Pro to turn on? It may be time to swap out the internal battery pack. This guide will walk you through the step-by-step process of replacing it.
What you need
-
-
-
Turn the controller over so the bottom is facing up.
-
Remove the four 6.4 mm screws using a Phillips #00 screwdriver.
-
Pry the controller open with an iFixit opening pick.
Ask FixBot
-
-
-
-
Disconnect the red wires connected to the battery.
-
Use an opening pick to pry the battery out.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Texas Tech, Team 21-5, Samson Spring 2026 Member of Texas Tech, Team 21-5, Samson Spring 2026
TTU-SAMSON-S26S21G5
5 Members
11 Guides authored
