Fix Your Stuff Community Store

Flash and re-install the firmware

Introduction

Guide on how to re-install the firmware, if it became corrupted and wheel is not powering on.

What you need

  1. Edit

    • Press on the Windows button and type "Firmware Update" into the search.

    Edit

    • Unplug T248 from USB port.

    • Keep it plugged-in to power

    Edit

  5. Flash and re-install the firmware, Press and hold MODE button: step 4, image 1 of 1

    • Press and hold MODE button

    Edit

  6. Flash and re-install the firmware, Connect to USB While holding MODE button: step 5, image 1 of 1

    • Keep holding the MODE button and connect it to USB port

    • Once connected, wait a few seconds and let go of the button

    Edit

    • Your device should show up in Firmware Updater

    • Press OK on the Firmware Updater and wait for update to complete

    Edit
Finish Line

One other person completed this guide.

Author

with 1 other contributor

Formica Fusca

Member since: 08/01/24

2,595 Reputation

15 Guides authored

Badges: 13

+10 more badges

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 33

All Time: 476