Step 1 Download and install drivers
• Download and install the driver package from here.
• TCA Yoke and TCA Quadrant both use the same driver.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2 Open Firmware Update app
• Press on the Windows button and type "Firmware Update" into the search.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3 Unplug your TCA Yoke from USB
• Unplug your TCA Yoke from USB port if you already have it plugged-in
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4 Press and hold the XBOX button
• Press and hold the Xbox button.
• Make sure to set your Yoke into PC mode, using the switch at the back, before proceeding to the next step.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5 Connect to USB while holding the Xbox button
• Keep holding the Xbox button and connect the Yoke to USB port.
• Once connected, wait a few seconds and let go of the button.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6 Update the firmware
• Your TCA Yoke should show up in Firmware Updater.
• Press OK on the Firmware Updater and wait for update to complete.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-177099" src="https://www.ifixit.com/Guide/embed/177099/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-177099"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/177099" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview