Introduction

Use this guide to glue the door handle back to its original position so that it is possible to open the door.

Tools

Parts

No parts required.

Image 1/1:
  • The door handle may fall off if overused or not glued properly.

Add Comment

Image 1/1:
  • Apply glue to the inside of the bracket on the handle.

Hi, a question for you. It is about the glue, is it a special one or with some specific active principle/ingridient ? The reason to ask is due to the heat from the owen. Thanks in advance.

Antonio - Reply

Image 1/1:
  • Replace the handle in its original position on the door.

Add Comment

Image 1/1:
  • Hold firmly for a minute to allow glue to properly set.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jack Cate

Member since: 10/19/2012

29 Reputation

1 Guide authored

Team

Cal Poly, Team 6-35, Regan Fall 2012 Member of Cal Poly, Team 6-35, Regan Fall 2012

CPSU-REGAN-F12S6G35

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 736