Introduction

If you determine there is no suction at the end of the hose, this guide will help you to replace a damaged hose.

On the back of the vacuum, pull the handle connected to the hose away from the vacuum. On the back of the vacuum, pull the handle connected to the hose away from the vacuum.
  • On the back of the vacuum, pull the handle connected to the hose away from the vacuum.

Add Comment

Deck the Halls
With tools and Fix Kits
Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose. Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.
  • Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Celina Burchett

Member since: 10/13/2014

998 Reputation

8 Guides authored

Team

Clemson, Team 2-2, Benson Fall 2014 Member of Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 24

All Time: 871