Skip to main content

Etón Scorpion Battery Replacement

What you need

  1. Etón Scorpion Battery Replacement, Battery: step 1, image 1 of 3 Etón Scorpion Battery Replacement, Battery: step 1, image 2 of 3 Etón Scorpion Battery Replacement, Battery: step 1, image 3 of 3
    • Your device should look like this.

  2. Etón Scorpion Battery Replacement: step 2, image 1 of 1
    • Turn the unit on its side and look for this panel.

  3. Etón Scorpion Battery Replacement: step 3, image 1 of 3 Etón Scorpion Battery Replacement: step 3, image 2 of 3 Etón Scorpion Battery Replacement: step 3, image 3 of 3
    • Unscrew this screw with a Phillips head #0 screwdriver.

    • Remove the panel.

  4. Etón Scorpion Battery Replacement: step 4, image 1 of 3 Etón Scorpion Battery Replacement: step 4, image 2 of 3 Etón Scorpion Battery Replacement: step 4, image 3 of 3
    • Pull out the battery and disconnect the connector.

Conclusion

To reassemble your device, follow these instructions in reverse order, and remember to connect the connector when putting in a new battery.

One other person completed this guide.

9021007

Member since: 07/13/18

4,599 Reputation

25 Guides authored

3 Comments

What specific battery did you purchase to replace the original battery pack? My battery needs to be 1.25” by 1.25” to fit into the compartment. Many of the batteries I have found on Amazon that claim to be replacement are much larger an won’t fit into the compartment.

Mark Chapin - Reply

https://www.amazon.com/South-33053-Cordl...

This battery seems to be a good fit. It says in the question and answer section that it’s 1.2"" x 1.15"x 0.42".

9021007 -

Need to switch the wire positions. What's the best way?

David - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 24

All Time: 1,097