Introduction

Replacing your ink cartridges.

  1. When you are low on ink your green power light will be flashing and your error light will stay a solid red.
    • When you are low on ink your green power light will be flashing and your error light will stay a solid red.

    Add Comment

  2. Lift the printer window open by pulling up on the tab.
    • Lift the printer window open by pulling up on the tab.

    • Your printer should now be in the same state as shown in the second picture.

    Add Comment

    • Press the button on the far right to get your ink cartridge holders to slide over. (See the second picture)

    Add Comment

    • Press the tabs with the upward facing arrows to open the hatches as shown in the first picture.

    • Remove the ink cartridge(s) that needs to be replaced. The black cartridge is on the left and the color cartridge is on the right.

    • Make sure your cartridges are the same as the ones shown in the third picture. Non-Epson ink cartridges may not be recognized by your printer.

    Add Comment

    • Insert your new ink cartridges and close the hatches.

    • Close your printer door and push the ink cartridge button on the far right and again.

    • After your ink charges you're ready to print!

    Add Comment

Finish Line

One other person completed this guide.

Alex Lin

Member since: 04/10/2011

78 Reputation

3 Guides authored

Team

Cal Poly, Team 20-68, Walters Spring 2011 Member of Cal Poly, Team 20-68, Walters Spring 2011

CPSU-WALTERS-S11S20G68

4 Members

6 Guides authored

One Comment

I pushed the 3rd button so the cartridge holder will slide over, it will not move.

I tried unplugging the printer and plugging it back in & repower it up. still 'stuck' to the right.

I need to change the black ink. can you help? thank you!

tina - Reply

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 6

Past 30 Days: 9

All Time: 2,458