Fix Your Stuff Community Store

Epiphone ES-335 PRO Tuner Replacement

Introduction

Follow these steps to replace a faulty or broken tuner at the head of the Epiphone ES-335 PRO electric guitar. This component of the guitar can also be changed to upgrade the design of the guitar to your liking.

What you need

  1. Epiphone ES-335 PRO Tuner Replacement, Strings: step 1, image 1 of 2 Epiphone ES-335 PRO Tuner Replacement, Strings: step 1, image 2 of 2

    • Using the tuner, loosen the string by turning the tuner.

    • Continue to loosen the string until it is easily unwrapped and pulled out of the tuner.

    Edit

  2. Epiphone ES-335 PRO Tuner Replacement: step 2, image 1 of 1

    • On the bridge of the guitar, push the string through the back until the other end is visible. Then grasp and pull the string all the way out.

    Edit

  4. Epiphone ES-335 PRO Tuner Replacement, Tuner: step 3, image 1 of 1

    • Using a phillips head #2 screwdriver, unscrew the two 1.0 mm length screws on the sides of the tuner.

    • Be sure to keep track of the screws if you are using them for the new tuner, unless the new tuner has screws of its own.

    Edit

  5. Epiphone ES-335 PRO Tuner Replacement: step 4, image 1 of 1

    • The tuner should come right out of the back of the head of the guitar.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 9

All Time: 1,346