Introduction
If you need to get into your Emerson VCR953 to clean the heads or do repairs on one of the circuit boards inside this shows how to take the top shell of to gain access
What you need
-
-
-
Remove the two 1/2" long #2 Philips screws from the rear of the case
Ask FixBot
-
-
-
-
Lift up on the back case and slide the top case back until it is free from the rest of the case
-
-
-
You will now have access to all the circuit boards and the top of all mechanical parts.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
