Introduction

The Wi-Fi adaptor is a small antenna inside the tablet that allows the device to connect to wireless internet. The adaptor features its own circuit board, which will be necessary to exchange the part. The circuit board will be desoldered from the motherboard and the antenna will be removed from the front case.

Remove the 4.6mm Phillips #00 screw at the base of the device.
  • Remove the 4.6mm Phillips #00 screw at the base of the device.

Add Comment

Slide the rear panel away from the base parallel to the screen.
  • Slide the rear panel away from the base parallel to the screen.

Add Comment

Carefully remove the speakers from the rear panel. Pull the speakers off of the rear panel.
  • Carefully remove the speakers from the rear panel.

  • Pull the speakers off of the rear panel.

Add Comment

Desolder the Wi-Fi Adaptor

Add Comment

Gently pry the antenna out of the front case
  • Gently pry the antenna out of the front case

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bailey Hughes

Member since: 03/22/2015

617 Reputation

6 Guides authored

Team

Baylor, Team 5-8, Williams Spring 2015 Member of Baylor, Team 5-8, Williams Spring 2015

BU-WILLIAMS-S15S5G8

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 60