Ematic Model FTABMP2 Power Button Replacement
Timothy and 4 other contributors
Last updated on Jun 13, 2023
Views: 613
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 21
- Past 30 Days:
- 75
- All Time:
- 613
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If your Ematic model #FTABMP2 won’t turn on or the power button is stuck or damaged, use this three-step guide to replace the power button.
The Ematic model #FTABMP2 is a small tablet device designed for children with its bulky plastic case. Turning it on is as simple as pressing the small plastic power button on its side. When the power button becomes stuck or damaged, the device cannot turn on.
This fix requires the iFixit Opening Tool for opening the plastic case and a replacement power button.
NOTE: Be careful when opening the device and exposing the motherboard. Consider purchasing iFixit's ESD safety gloves to decrease the risk of contamination to any sensitive parts in the motherboard.
What you need
Tools
-
-
-
Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 9-2, Brown Winter 2015 Member of USF Tampa, Team 9-2, Brown Winter 2015
USFT-BROWN-W15S9G2
5 Members
60 Guides authored
