Parts

No parts required.

Introduction

The speaker would need to be re-positioned if the speaker has moved when the device was opened and now it creates a buzzing noise. This guide is recommend to follow in conjunction with our speaker replacement guide.

Image 1/2: Be mind full of the clips so that they don't get broken when opening the case. The clips are on the blue side and clip into the white side of the case. Image 2/2: Be mind full of the clips so that they don't get broken when opening the case. The clips are on the blue side and clip into the white side of the case.
  • Open the case to get to the speaker.

  • Be mind full of the clips so that they don't get broken when opening the case. The clips are on the blue side and clip into the white side of the case.

Add Comment

Image 1/1:
  • Locate the speaker on the back of the screen.

Add Comment

Image 1/2: Arrange the speaker on the back of the screen so when the case is snapped back together the speaker will fit inside of the housing. Image 2/2: Arrange the speaker on the back of the screen so when the case is snapped back together the speaker will fit inside of the housing.
  • Locate the speaker housing on the blue case.

  • Arrange the speaker on the back of the screen so when the case is snapped back together the speaker will fit inside of the housing.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Xavier Smith

Member since: 01/21/2015

210 Reputation

2 Guides authored

Team

USF Tampa, Team 6-3, Brown Winter 2015 Member of USF Tampa, Team 6-3, Brown Winter 2015

USFT-BROWN-W15S6G3

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 47